In recent yearsCarbon neutrality policies, rising oil prices, and subsidies for new energy purchases for a period of time are all strengthening the general trend of new energy. According to the New Energy Automobile Industry Development Plan(2021-2035Year)", as2035In, China's new energy vehicle penetration rate will reach50%.The rapid development of the electric vehicle industry has also led to the modification ofPPThe market for raw materials rose.Auto parts, different types of reusable containers, plastic parts, packaging and labels, speakers, polymer banknotes, stationery, textiles, carpets, ropes and thermal underwearAll of the above have a common root. It is a polypropylene raw material, abbreviatedPP.PPis a recyclable thermoplastic polymer that is widely used in these applications. The global demand for polypropylene materials is quite high. Transparent market research shows that the current global polypropylene market value exceeds800Billions of dollars. According to the data of research institutions,2023year, it will reach1333Billions of dollars.Today we will briefly introduceRegenerationPPof polypropyleneChangesex and recovery process.

Polypropylene recycling is essential for the environment

Of all plastic packaging products in the UK and the US,PPIt is the most used single plastic packaging, thanks to its melting point and strong bearing capacity. Only in2010The United States produced.50billion pounds of polypropylene. Unfortunately, the American Chemical Council (American Chemistry Council) disclosure,PPis one of the lowest recycling rates in post-consumer plastics, post-consumerPPThe foam recovery rate is lower1%. This is bad for the environment.

Polypropylene has a short lifespan, so most thermoplastics are wasted in landfills. According to the U.S. Environmental Protection Agency (US Environmental Protection Agency) said that approximately20%contains some form of plastic, including polypropylene (PP). This solid waste containing polypropylene degrades very slowly in landfills and takes approximately20To30Years can be completely broken down. Naturally, this poses a serious threat to the environment. Additives used in plastic products may contain toxins such as lead and cadmium. Cadmium contained in plastic products has the potential to penetrate and affect certain biological systems. If you burnPPsuch as thermoplastics, it will expel toxins and vinyl chloride. In this context, recycled polypropylene is of great significance.

Polypropylene Recycling Process

The polypropylene recycling process includes collecting, sorting, cleaning, melt reprocessing, and then producing new products from the recycled polypropylene. Melt reprocessing and reusing recycled polypropylene to produce new products are important steps in the polypropylene recycling process. In the post-treatment stage, the collected polypropylene product is fed to an extruder where it is melted and cut into pellets. Use a special extruder for granulation. Granulation includes cold water granulation or air cooling granulation. The packaging is then labeled. Finally the pellets are ready for use in the production of new products.

Specifically, the polypropylene recycling process can be divided into two types, the first is direct recycling.

Direct recycling refers to the need for all kinds of modification of waste polypropylene after cleaning, crushing, plasticizing direct processing molding or through granulation after processing molding products, the advantage is simple process, low cost of recycled products, the disadvantage is that the mechanical properties of recycled materials products decreased greatly, not suitable for the production of high-grade products.

The second way is filling modification. In order to improve the application range of recycled waste, it can be modified by filling.

Polypropylene(PP)Non-polar polymer, lack of reactive groups, its hydrophilicity, dyeing, adhesion and compatibility with other polar polymers and inorganic fillers are very poor. In order to improve the performance of recycled materials and meet the quality requirements of special products, various modification methods should be adopted to introduce polar groups into polypropylene, so that some mechanical properties of waste polypropylene can reach or exceed the performance of original resin products, the modification and reuse of waste polypropylene is a promising way.

Adding a certain amount of inorganic filler and organic filler to waste polypropylene resin can improve some properties of its products, such as rigidity, hardness, heat resistance, dimensional stability, creep resistance and polarity, etc. and can reduce the cost of materials. Waste polypropylene commonly used inorganic fillers are: mica powder, calcium silicate, talc, wollastonite, carbon black, gypsum, red mud, lithopone and barium sulfate, etc., commonly used organic fillers are: wood powder, rice husk powder and peanut shell powder. Filling modified polypropylene with calcium carbonate, talc and other minerals can make it obtain excellent dimensional stability. Studies have shown that the use of mica filler to fill polypropylene modified , can improve polypropylene plusEPDMRigidity of the system. The tensile strength of the composites was reduced by filling polypropylene with wollastonite, but the notched impact strength was improved.

Traditional preparation methods have low filtration accuracy for plastic particles, and the recycled plastics produced have problems such as many impurities and strong odor, which cannot be used to make high-end products with high requirements on appearance and properties. In response to these problems, we have innovated the recycling and recycling process. From raw material acquisition, production and processing, transportation and distribution to use, waste disposal stage, to achieve the whole carbon neutral. The first link is deep cleaning. First, the impurities and oil stains on the lunch box are initially removed, and then the fragments of the lunch box with high cleanliness are obtained after crushing and disinfection. The second link is the melting granulation of the high-temperature furnace, and the fragments are reborn and transformed into new polypropylene raw materials. The third step, these"All grains are environmentally friendly" materials have to be inspected, and qualified modifiers are added to carry out anti-fall, anti-sun and anti-freeze treatments to produce high-quality plastic particles. The new hot washing scheme replaces the past sonic cleaning and manual cleaning, reducing the use of cleaning fluid and water, and at the same time, it can also remove the oil on the surface of the material to the greatest extent and reduce the pressure of the follow-up link. The impurities in the particles are reduced by improving the accuracy of the filter screen. The use of vacuum exhaust method to remove the volatile substances in the particles, thereby reducing the odor of recycled plastic, creating a low black spots, low odor, high transparency of high qualityPPParticles.JustGeneralPPMaterialsIn termsThe shrinkage rate is large, the dimensional stability of the product is poor, and it is easy to produce warping deformation; the low temperature toughness is poor, and the brittle fracture is easy to break; the shortcomings of light aging resistance and heat aging resistance are poor. unable to meet the requirements, usuallyAlsoare modifiedPPmaterials are processed.

The power of recycled polypropylene

weight ratio of solid waste from polypropylenePET,PSorPVCLess. Therefore, polypropylene has many recycling applications: battery boxes, paint cans, home storage rooms, flower pots, pallets, crates, composite wood, etc. In the United States, the state51In the largest city, there are44A collection of polypropylene.

withPET,PSandPVCCompared to polypropylene and high-density polyethylene (HDPE) generatedCO2The equivalent weight is significantly reduced. Polypropylene parts can100%Recycled for various uses. Recycled polypropylene (rPP) The market exists in a wide range of products, such as automotive applications, barrels, lids and lids, garden furniture, pallets, pipes, etc.

When polypropylene is recycled, the consumption of limited resources such as petroleum and propane gas can be reduced. Global approx.8%of oil (approx.4billion tons) using traditional plastic production methods, which4%As a "raw material", in addition4%for manufacturing. If plastic is produced from plastic, then the energy consumption will also be reduced.88%. Therefore, the recycling of plastics is environmentally friendly.

Polypropylene has a low density in automotive plastics and is currently one of the lightest varieties of plastics. The low density of polypropylene provides important methods and ideas for providing automotive lightweight solutions. Therefore, polypropylene modified plastics play an important role in the lightweight process of automobiles. In addition, polypropylene is easier to recycle, and there is a molded recycling industry chain at home and abroad, which is also a great advantage compared to engineering plastics. At present, it is widely used in the electric vehicle industry abroad. It has been recognized by German Volkswagen, Mercedes-Benz and other brands.

Dongguan CityYujie IndustrialINVESTMENT LIMITEDIs a state-level high-tech enterprises, companiesProfessional production and salesInnovative modified plastic raw materials,Include:RPP,RPC,RABS,RPC/ABS,RPET,RPOM,HIPS,RTPUWait,PassedUL,GRS,ROHS,REACHEnvironmental certification,It can replace imported raw materials.WelcomeCustomized development, fast provision of sample materials,Sales Hotline:13694989616